 |
|
HC
Series
Graphite
and Hard Milling
HC-658
The
HC-658's high rigidity, bridge-type
monoblock structure allows high-speed,
high-precision machining while
the minimized distance between
guide surface and spindle center
provides greater stability.The
high rigidity bed with ideal
rib distribution has been designed
by computer analysis with a
guaranteed static positioning
accuracy of ±0.000060”
and ±0.000020” repeatability.
The HC-658 is capable of a wide
range (200 - 32,000 RPM) using
a grease-packed spindle and
a long-life AC motor. High-speed
direct hard milling can be done
by dry or semi-dry oil-mist
systems. New HSK-E40 holder
achieves six times higher clamping
force than a regular BT shank
while Dual Balance Cylinders
reduce load for the ball screw
and servo motor.
The HC-658 features a Fanuc
31i-A5 Super High-Speed Processor
and Al Contour Control II –
A “NANO CNC System” with Intelligent
Velocity Control, NANO Interpolation
and NANO Smoothing. The look
ahead has been expanded to 1,000
blocks. |
|
|
|
|
|
 |
| HC-658 |
|
| Table
Size |
29.52"
x 19.68" |
| Spindle
Power |
8.4
hp |
| Spindle
Speed |
32,000
rpm |
| Spindle
Taper |
HSK-E40 |
| Axis
Travel X/Y/Z |
23.62"/19.68"/15.74" |
| Max
Rapid Rate X/Y/Z |
787/787/787
ipm |
| Max
Prog. Feedrate |
787
ipm |
| Magazine
Capacity |
30 |
|
|
|
|
| |
|
| |
|
|
