 |
|
VS-652
Flood Machining
High-Speed
Milling-Drilling-Tapping
The
VS-652's high rigidity, bridge-type
monoblock structure allows high-speed,
high-precision machining while
the minimized distance between
guide surface and spindle center
provides greater stability.The
high rigidity bed with ideal
rib distribution has been designed
by computer analysis with a
guaranteed static positioning
accuracy of ±0.000060”
and ±0.000020” repeatability.
The VS-652 is capable of a wide
range (200 - 30,000 RPM) using
an oil mist lubricated spindle
and a 20 HP AC spindle motor.
High-speed direct hard milling
can be done by dry or semi-dry
oil-mist systems. New HSK-E40
holder achieves six times higher
clamping force than a regular
BT shank while Dual Balance
Cylinders reduce load for the
ball screw and servo motor.
The VS-652 features a Fanuc
31i-A5 Super High-Speed Processor
and Al Contour Control II –
A “NANO CNC System” with Intelligent
Velocity Control, NANO Interpolation
and NANO Smoothing. The look
ahead has been expanded to 1,000
blocks. |
|
|
|
|
|
 |
| VS-652
|
|
| Table
Size |
29.52"
x 19.68" |
| Spindle
Power |
20
hp |
| Spindle
Speed |
30,000
rpm |
| Spindle
Taper |
HSK-E40 |
| Axis
Travel X/Y/Z |
23.62"/19.68"/15.74" |
| Max
Rapid Rate X/Y/Z |
787/787/787
ipm |
| Max
Prog. Feedrate |
787
ipm |
| Magazine
Capacity |
30
|
|
|
|
|
| |
|
| |
|
|
