 |
|
5-Axis
Machining
High-Speed
Five Axis Milling
RMX-50V
The
RMX-50V features a high rigidity,
bridge-type monoblock structure
and minimized distance between
guide surface and spindle center.
The high rigidity bed with ideal
rib distribution has been designed
by computer analysis and produces
±0.000060” X-Y-Z positioning
and ±0.000020” repeatability
with a dual feedback system
using linear scales.
The RMX-50V is also capable
of a wide speed range (200 -
30,000 RPM) using an 20 HP AC
spindle motor. The new HSK-E40
holder achieves six times higher
clamping force than a regular
BT shank and Dual Balance Cylinders
reduce load for the ball screw
and servo motor.
The RMX-5 also features a Fanuc
31i-A5 Super High-Speed Processor
and Al Contour Control II –
A “NANO CNC System” with Intelligent
Velocity Control, NANO Interpolation
and NANO Smoothing. The look
ahead has been expanded to 1,000
blocks. |
|
|
|
|
|
 |
| RMX-50V
Five-Axis |
|
| Table
Diameter |
Ø7.87"
|
| Spindle
Power |
20
hp |
| Spindle
Speed |
32,000
rpm |
| Spindle
Taper |
HSK-E40 |
| Axis
Travel X/Y/Z |
23.62"/19.68"/15.7" |
| A-Axis
front/back tilting |
-110°
/ +110° |
| C-Axis
Rotation |
360° |
| Max
Rapid Rate X/Y/Z |
787/787/787
ipm |
| Max
Prog. Feedrate |
590
ipm |
| Tool
Mag. Cap. |
60 |
|
|
|
|
| |
|
| |
|
|
