Sliding Headstock Automatic
Ideal for production in medical, aerospace, and mechanical components shops.

TNL 18
The TNL18 has 7 linear axes.
Both tool carriers have large X/Y/Z-axis travels. The tool carriers are a highlight of the machine design because the rotary motion is executed by an NC axis without any mechanical locks. This allows to position both turrets very fast at any angle. The counter spindle with integrated lower turret positions on 3 axes resulting in ultimate transfer accuracy.
The TNL18 is two machines on one compact base for machining of stock to .787" (20mm) with and without a guide bushing.
Features
• 5 linear axes plus Y motion.
• Up to 3 tools in the cut at once.
• Superior accessibility -- X-axis stroke of 4.72" (120mm).
• Quick positioning top tool turret with a larger capacity than any gang carrier—up to 24 tools and chip-to-chip time less than 0.3 sec.
• Counterspindle with large X/Y/Z axis travels and integrated 7-station tool carrier--each station can be equipped with multiple holders.
 
TNL-12   TNL-18   TNL-18P   TNL-26
 
TNL 18
-
Headstock
-
Bar Capacity
0.787""
Z Max. Travel with guide/ No guide
8.07"/ 3.15"
Spindle Speed
12,000 rpm
Spindle Power 100%/40%
4/7.4 hp
C-Axis
0.001°
Top Turret
-
Tool Mountings/Driven Tools
8/8
Spindle Power 100%/40%
1.3/2.7 hp
Slide travel X1/Z1
4.7"/9.8"
Slide travel Y1
-1.6" +1.0"
Bottom Turret -
Tool Mountings/Driven Tools
7/7
Spindle Power 100%/40%
2/3.4 hp
Slide travel X2/Z2
4.7"/9.8"
Slide travel Y2
-0.8" +1.6"
*For additional specifications please see brochure
 
TNL 18
Tx8i Control Brochure
 
TNL-18 Introduction and Cutting Demo