Sliding Headstock Automatic
Economical Machining of complete Parts.

TNL 18P
The TNL18P has 5 linear axes. In addition the Y motion evolves from X/C/H axis interpolation.

The tool carriers are a highlight of the machine design because the rotary motion is executed by an NC axis without any mechanical locks. This allows to position both turrets very fast at any angle. The counter spindle with large X/Y/Z axis travels and integrated lower turret positions on 3 axes resulting in ultimate transfer accuracy.

The TNL18 is for machining of stock to .787" (20mm) with and without a guide bushing.
Features
• Simultaneous machining with up to 3 tools possible.
• Easy change-over for turning operation with and without a guide bush.
• Superior accessibility -- X-axis stroke of 4.72" (120mm).
• Turret indexing using an NC rotary axis.
• 3-axis grasping with counter spindle.
 
TNL-12   TNL-18   TNL-18P   TNL-26
 
TNL 18P
-
Headstock
-
Bar Capacity
0.8""
Z Max. Travel with guide/ No guide
8.1"/ 3.1"
Spindle Speed
10,000 rpm
Spindle Power 100%/40%
3/5 hp
C-Axis
0.001°
Top Turret
-
Tool Mountings/Driven Tools
8/8
Spindle Power 100%/40%
1.3/2.7 hp
Slide travel X1
4.7"
Bottom Turret -
Tool Mountings/Driven Tools
7/7
Spindle Power 100%/40%
2/3.4 hp
Slide travel X2/Z2
4.7"/9.8"
Slide travel Y2
-0.8" +1.6"
*For additional specifications please see brochure
 
TNL 18P
Tx8i Control Brochure
 
TNL-18P Introduction and Cutting Demo